Jump to content


Photo

Track Sounds


This topic has been archived. This means that you cannot reply to this topic.
3 replies to this topic

#1 Nosloptrainman

Nosloptrainman

    Track Layer

  • Valued Customer
  • Pip
  • 12 posts

Posted 29 October 2011 - 05:54 AM

When modifying the track sounds to get them to occur only over the switches and junctions, is it necessary to change the bin file AND the track properties in the editor? I received good assistance in changing the BT_Ballast Bin folder info, however, I wonder if the editor change is also required? Does the selection of a particular type of track effect the sounds too? Thanks!

#2 Hack

Hack

    The Big Kahuna

  • 3DTrains Admin
  • 7,337 posts

Posted 29 October 2011 - 10:49 AM

I don't believe it matters for switches and tunnels, but for bridges and other special track work the track properties need to be changed in the editor. Cheers! Marc

#3 Nosloptrainman

Nosloptrainman

    Track Layer

  • Valued Customer
  • Pip
  • 12 posts

Posted 29 October 2011 - 02:03 PM

Marc, Will setting the Distance between Joints and the Junction Clatter Distance in the Bin to zero, effectively "turn off" ALL the track sounds?

#4 Nosloptrainman

Nosloptrainman

    Track Layer

  • Valued Customer
  • Pip
  • 12 posts

Posted 29 October 2011 - 09:49 PM

Found out the other way to limit the track sounds is to deal with the locomotive bogie file directly. Thanks!